ONU error code

Write By: administratorPublished In: ZTE ONU ONTCreated Date: 2019-07-09Hits:401Comment:0

ONU error code

ONU error code


601 invalid port handle detected.
      An internal error occurred, restart the computer to ensure that all recent configuration changes can take effect.

602 the specified port has been opened.
      The COM port the network connection is trying to use is being used by other active                network connections or other processes,            such as telephone line monitors such as fax programs. Exit the application blocking the use of COM ports.

603 the caller's buffer is too small.
      An internal error occurred, restart the computer to ensure that all recent configuration changes can take effect.
604 specifies incorrect information.
      Remote access notebook files and current Network and Dial Connection configuration may be inconsistent. If you change a              communication device, such as a serial port or modem, make sure you reconfigure Network and Dial Connection.

605 port information cannot be set.
      Remote access notebook files and current Network and Dial Connection configuration may be inconsistent. If you change a          communication device, such as a serial port or modem, make sure you reconfigure Network and Dial Connection. If errors          still   exist, please delete and recreate "network and dial up connections".

606 the specified port is not connected.
       An internal error occurred and the computer was restarted to ensure that all recent              configuration changes took effect.

607 an invalid event was detected.    
      An internal error occurred and the computer was restarted to ensure that all recent              configuration changes took effect.

608 the specified device does not exist.     
      Remote access notebook files and current Network and Dial Connection configuration            may be inconsistent. If you change a          communication device, such as a serial port        or modem, make sure you reconfigure Network and Dial Connection. If errors          still        exist, please delete and recreate "network and dial up connections".

609 the specified device type does not exist.
       Remote access notebook files and current Network and Dial Connection configuration             may be inconsistent. If you change a         communication device, such as a serial port         or modem, make sure you reconfigure Network and Dial Connection. If errors                       still exist, please delete and recreate "network and dial up connections".

610 the specified buffer is invalid.
       An internal error occurred and the computer was restarted to ensure that all recent              configuration changes took effect.

611 the specified route is not available.
      Network configuration may be incorrect, restart the computer to ensure that all recent configuration changes take effect. If        the error persists, refer to the Windows 2000 error log for detailed warnings or errors.
      
612 the specified route is not allocated.
       Network configuration may be incorrect, restart the computer to ensure that all recent configuration changes take effect.             This error also occurs when a computer runs in a very low resource condition. If the error persists, refer to the Windows             2000 error log for detailed warnings or errors.

613 the specified compression is invalid.
      An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

614 there is not enough buffer available.
An internal error occurred, restart the computer.To ensure that all recent configuration changes are effective. If the error persists, refer to the Windows 2000 error log for detailed warnings or errors.

615 no specified port was found.
Remote access notebook files and current Network and Dial Connection configuration may be inconsistent. If you change a communication device, such as a serial port or modem, make sure you reconfigure Network and Dial Connection. If errors still exist, please delete and recreate "network and dial up connections".

616 asynchronous request pending.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

617 modem has been disconnected.
Wait for "network and dial connection" to complete disconnection.

618 the specified port is not open.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

619 the specified port is not connected.
Restart the computer to ensure that all recent configuration changes can take effect.

620 unable to decide endpoints.
Network configuration may be incorrect, restart the computer to ensure that all recent configuration changes take effect. If the error persists, refer to the Windows 2000 error log for detailed warnings or errors.

621 the system cannot open the phone book.
The network and dial up connections use the rasphone.pbk file located in the%systemroot%\system32\ras folder. Please ensure that this file is located in this folder, then restart the network and dial up connection.

622 the system cannot load the phone book.
The network and dial up connections use the rasphone.pbk file located in the%systemroot%\system32\ras folder. Please ensure that this file is located in this folder, then restart the network and dial up connection. 623 the phone book entry for this connection could not be found. The network and dial up connection is located in the phone book, but the specified connection item cannot be found. This error should not occur unless another application is using "Network and Dial-up Connection" and incorrect connection items are used.

624 the system cannot update the phone book file.
The network and dial up connections use the rasphone.pbk file located in the%systemroot%\system32\ras folder. Please make sure that the disk is not full and that you have the power to change the file.

625 the system finds invalid information in the phone book.
The phonebook file rasphone.pbk may have been corrupted. Delete the file from the%systemroot%\system32ras folder and restart Network and Dial Connection to create a new file.

626 unable to load string.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect. If the error persists, refer to the Windows 2000 error log for detailed warnings or errors.

627 unable to find keywords.
One of the Network and Dial-up Connections configuration files may contain invalid information, and if you are using a modem that is not supported by Windows 2000, you should install a supported modem.

628 connection is closed.
If it is a dial-up connection, redial. If this message persists, reduce the initial speed of the modem and turn off the advanced features of the modem. If
The problem is still there. Please contact the system administrator. If it is a virtual private network (VPN) connection, access may be denied due to remote access policy or other authentication issues. Please consult the system administrator.
The 629 connection is closed by the remote computer.
The link is disconnected for the following reasons:
1. Unrecoverable telephone line error
2. Noise circuit
3, disconnected by system administrator.
4, you can't negotiate with the modem on the remote access server at the selected speed.
If the redial error still exists, slow down the connected modem, and then try redial. You can try to connect to other servers to determine whether this problem is related to a particular remote access server that is being called. Similarly, you can try connecting to the original server through another telephone line.

630 the modem disconnects because of hardware failure.
Links are disconnected for one reason:
1, the modem (or other communication devices) has had an unrecoverable error.
2, there is an unrecoverable error in the communication port.
3, the modem cable is not inserted.
To diagnose and correct problems, do the following:
1, ensure that the modem has been energized and the cables are reliably connected.
2, to ensure the normal operation of the modem, the instruction panel can be tested through the control panel.

631 the user disconnected the modem.
One operation of the computer disconnected. Redial.

632 the incorrect size of the structure was detected.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect. If the error persists, refer to the Windows 2000 error log for detailed warnings or errors.

633 modem is being used or not configured for dial out.
If it is a dial-up network connection, the COM port that the network connection is trying to use is being used by other active network connections or other processes, such as telephone line monitoring programs such as fax programs. Exit the application blocking the use of COM ports.
If it is a virtual private network (VPN), you cannot open the VPN device that the network connection is trying to use. If the problem persists, consult the system administrator.

634 your computer can not register on the remote network.
Remote access servers can't register your computer name on the network, which usually comes with the NetBIOS protocol, but may also come with TCP / IP or ipx.
Usually, this error occurs when the address is already on the network. Please contact your system administrator.
635 an unknown error occurred.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect. If the error persists, refer to the Windows 2000 error log for detailed warnings or errors.

636 the device connected to the port is not the desired device.
The hardware configuration and configuration settings used for the connection may be contradictory if you change the communication device (such as a serial port or modem), reconfigure the dial-up connection.

637 detects a string that cannot be converted.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

638 request timeout.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

639 asynchronous network is not available.
NetBIOS network configuration may not be correct. Restart the computer to ensure that all recent configuration changes can take effect.

640 NetBIOS related errors occurred.
The modem can't negotiate the connection at the set speed, set the initial speed of the modem to a lower value, and then redial. You can also try to disable modem compression and software compression. If a connection is not yet established, try adding the ipx/spx and NetBIOS protocol to the connection.

641 the server cannot allocate the NetBIOS resources needed to support the client.
Ask the system administrator to increase the resource capacity of the remote access server, or stop some important services, such as messenger service, network DDE.

642 a NetBIOS name of the computer has been registered on the remote network.
Another computer with the same name has been logged on to a remote network, and each computer in the network must be registered with a unique name to verify the following items:
1. The computer with the same name as your computer is not located in the network you are connecting to.
2, the computer is not physically connected to the network that is trying to connect.

643 the server's network card is out of order.
Please report this error to the system administrator.

644 you will not be able to receive network pop-up messages.
Another computer connected to the network is using your computer name, and messages written to you are sent to that computer. If you want to receive messages from a remote workstation, you must remember to log off your office computer before dialing into the network the next time. This error does not affect messages sent by outlook, Outlook Express and exchange.

645 internal authentication error occurred.
An internal error occurred and the computer was restarted to ensure that all recent configuration changes took effect.

646 this time does not allow the account to login.
To restrict access to the network configuration account. If you need to access the network at different times of the day, rather than at the time of the current configuration, ask your system administrator to change the settings.

647 this account is disabled.
User accounts are disabled. This may be due to repeated failed attempts to log in, or because the system administrator disabled the account for security reasons. Ask the system administrator to enable accounts in local users and groups.

648 the password for this account has expired.
If you connect through the network and dial-up connection, the system prompts for a change of password. If you use rasdial to connect, you can change the password through the following actions:
1. Press Ctrl+Alt+Del
2, click change password, and then follow the prompt operation.
If you are a system administrator, but your password expires, you can not change the password yourself, only by another administrator to change.

649 the account does not have the right to dial in.
Due to the following reasons, the account does not have the right to dial in:
1. there is a valid account in the selected domain, but the account does not have access to the remote network. Ask the system administrator to enable dial-in privileges for user accounts, or to enable dial-in privileges in Routing and Remote Access.
2. the account has been expired, disabled or locked.
Fixed or dial in access has been locked.
Attempts to connect outside the allowed server logon time limit, or attempts to connect outside the allowed logon access time limit, or policies applied to the account may not allow logon access.
3. The caller's ID rule may prevent the connection from proceeding, for example, the need to dial into an account from a specified number.
4. remote computers may only allow local accounts to be connected.
5. Require an authentication protocol that the computer cannot negotiate, or that the computer is trying to use a protocol that is not authenticated by a policy on the remote computer.
If you have an account with dial-in privileges in another domain, do the following to use the account on that domain.
1. right click on the connection, and then click properties.
2. On the Options tab, select the prompt for name, password, certificate, and so on, and the Windows login domain check box.
3. On the Security tab, clear the Automatically Use My Windows Login and Password (and Domain, if any), check box, and then click OK.
4. double-click the connection and click dial.
5. specify the appropriate username, password and domain.
650 the remote access server did not respond.
Any of the following situations may lead to the error:
1. no running remote access server. Contact the system administrator to ensure that the server is running.
2. The line noise is too high, or the modem can't negotiate correctly with the modem of the remote access server at the selected speed. For any possibility, the initial speed of the modem should be reduced (BPS) and redial.
3. check the hardware compatibility list to ensure that your modem is listed.
4. it may be necessary to replace the serial cable of the modem.
5. the authentication settings for connections may not be correct. Contact your system administrator to ensure that your authentication settings meet the requirements of the remote access server.
6. the software compression and modem hardware compression of remote access servers may also be enabled. In general, remote server software compression is enabled, and hardware compression is disabled.

651 modem report error.
The modem (or other device) reported a mistake.
If it is a dial-up connection and you are using the supported external modem, close and restart the modem. Close and restart.

652 there is an unrecognized response from the modem.
Messages returned by a modem (or other device) are not listed in one or more of your script files (Pad. inf, Switch. inf, or filename. scp). If you are using a supported external modem, close and restart the modem, and then redial. If the problem persists, try connecting at a lower initial speed.

676 the line is busy.
Redial the number. Automatic redial is implemented in the Options tab of the connection property. If it is a virtual private network (VPN) connection, check the host name or IP address of the target server and try again. You also need to contact the system administrator to verify whether the remote server is running.

678 the server is not responding.
modulation
There is no off hook for demodulator or other devices. Check the number and dial again. If it is a virtual private network (VPN) connection, check the host name or IP address of the target server and try again. Also ensure that the telephone line is inserted in the correct slot of the modem (NIC).

679 the system is unable to detect the carrier.
No modem or other device has been removed. If the remote modem is not off hook, many modems will return the error. Check the number and dial again. If it is
Virtual Private Network (VPN) connections, check the host name or IP address of the target server, and then try again. Automatic redial can be achieved in the "options" card of the connection property.

680 no dial tone.
The telephone line may not be connected to the modem correctly or has been disconnected from the modem. Telephone numbers need to be accessed for external lines, for example, 9, or the number is too long. Make sure that the phone line is inserted in the correct slot of the modem. Also make sure you add all the special access numbers connected to the outside line, such as prefix 9 followed by a comma. For example, 9555*0100. Check whether there is a stutter tone on the phone line, which indicates the voice mail message. Many modem dial-up can not exceed 34 digits. When a longer number is encountered, these modems divide it into two or more strings and dial only the first (incomplete) string. This happens in the demodulator of Robotics and Multitech. The only known solution to this problem is to use another brand of modem.

691 because user name and / or passwords are invalid in this domain, access is denied.
No user accounts were registered with the domain listed, password expired, or incorrectly entered information. If no domain is specified, the remote access server attempts to authenticate the username and password in the domain of which it is a member.
Please carefully reenter the username, password and domain. If you are not sure of this information, please consult the system administrator.

692 there is a hardware failure in the modem.
Modems (or other devices) have not responded to the following reasons:
The modem is turned off, malfunctioning or not reliably connected to the computer.
To solve this problem, do the following:
1) reset the modem. For more information, please refer to the hardware documentation.
2) If you are using an external modem, make sure you use the appropriate serial cable and the cable connection is reliable. It may be necessary to try to replace the modem cable. Similarly, if you are using an adapter to connect an external modem to a serial port, make sure the adapter is wired correctly for modem communication. For example, a 9 to 25 pin adapter for a mouse can not work correctly in serial network connections.
3) test serial port or multi port adapter, if necessary, replace.
4) ensure that the handshake option of the modem is properly configured. Please refer to the hardware documentation for information on different handshake options that can be used for your modem.
5) If Network and Dial-up Connection does not support your modem, switch to the supported modem.
6) verify that other applications (for example, "super terminal") do not use communication ports. If this port is being used, it will then be opened.
Moving the "network and dial-up connection" may cause the message to appear.

695 the machine is not started.

696 boot machine.

697 response loop is not completed.

Leave A Comment

Captcha