Here are the general steps for configuring a ZTE F660 router:
Access the Router Interface:
Connect your computer to the ZTE F660 router using an Ethernet cable or via Wi-Fi.
Open a web browser on your computer.
In the address bar, enter the default IP address for the router, which is typically "192.168.1.1" or "192.168.0.1". Press Enter.
Login: admin password: admin
You will be prompted to enter a username and password. The default credentials may be provided on a sticker on the router or in the documentation provided by your ISP. If not, you should contact your ISP for this information.
Enter the username and password and click "Login" or "Submit."
Basic Setup:
Once logged in, you'll see the router's web interface. Look for a section related to basic setup or WAN configuration. Here, you'll typically configure settings like:
WAN Connection Type (DHCP, PPPoE, Static IP, etc.)
Username and password for your internet connection (if required).
DNS settings (often provided by your ISP).
Wireless Settings:
If you want to configure Wi-Fi, look for a section related to wireless settings. You can set your SSID (network name), security type (WPA2/WPA3), and Wi-Fi password.
Security Settings:
It's crucial to change the default router login credentials for security reasons. Look for a section related to administrator settings or router password.
Port Forwarding and Firewall:
If you need to open specific ports for applications or gaming, there should be a section for port forwarding in the router settings. You can also configure firewall settings for security.
Save Settings:
After making changes, be sure to save your settings. There is usually a "Save" or "Apply" button at the bottom or top of the configuration page.
Reboot:
Sometimes, changes may require a router reboot to take effect. Look for a reboot option in the router's interface.
Please keep in mind that the exact steps and options can vary depending on the specific firmware version of your ZTE F660 router and the configuration provided by your ISP. If you encounter difficulties or are unsure about any settings, it's best to contact your ISP's customer support for assistance or refer to any documentation they have provided.
