ZTE OLT C320 Common Commands

show running-config (load various boards)

show gpon onu uncfg (View all unconfigured ONUs on the OLT)

show gpon onu uncfg gpon-olt_1/3/2 (view unconfigured ONUs under the port)

show gpon onu state gpon-olt_1/2/1 (View the status of ONUs under the port)

show mac (View MAC address)

show card (View the online status and version information of the host board and line card)

show version-running (View the current running version information)

show vlan summary (query the created VLANs)

show vlan 813 (query 813VLAN bound ports)

show processor (CPU occupancy)

show port-statistics interface gei_1/19/3 (port traffic statistics)

show interface gpone-onu_1/2/1:3 (port-statistics)

show users (The network element Ping cannot be connected: there are two main possibilities: the network element is full of users and the network element's MAC

address or IP address of the network element is in conflict, check whether the network element users are full, you can use show users or who command to

show epon authentication-mode 1)

show epon authentication-mode 1/2 (query OLT line card ONU authentication registration mode)

show onu-type (query the ONU types currently supported by the system)

show running-config interface gpon-onu_1/2/1:4 (View the configured ONU data)

show onu running config gpon-onu_1/2/1:4 (View configured ONU data)

exit (Return to previous level)

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Delete an ONU that has already been registered

show gpon onu uncfg (View all unconfigured ONUs of the OLT)

con t (enter configuration mode)

interface gpon-olt_1/3/1 (Enter the specified PON port)

no onu 1 (Delete the specified ONU ID)

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

First log in to the OLT to register the ONU, transmit vlan, and send IP:

con t (Enter configuration mode)

interface gpone-olt_0/1/2 Register onu under the second PON port in the first slot of the OLT

onu 12 type ZTEG-F822 sn ZTEGB0004C93 Register the 12th onu under the second PON port in the first slot of the ot

interface gpone-onu_0/1/2:12

name ONU-2:12 (ONU simply stated)

tcont 2 profile UP-50M (Add the "UP-50M" bandwidth template with a broadband of 50M)

gemport 1 name gemport-1 unicast tcont 2

service-port 1 vport 1 user-vlan 200 svlan 200 (Join the primary VLAN)

service-port 2 vport 2 user-vlan 101 to 124 svlan 1060 (inner VLAN to inner VLAN, svlan outer VLAN)

=======================================

1. Configure the ONU template, and

Since the default ONU type of GPON system does not have F620, you need to add it explicitly. In the current C220 version, the ONU type name should be unique in GPON and EPON, so we use "ZTEG-F620" here.

ZXAN(config)# pon

ZXAN(config-pon)# onu-type gpon ZTEG-F620 description 4ETH,2POTS

ZXAN(config-pon)# onu-if ZTEG-F620 eth_0/1-4

ZXAN(config-pon)# onu-if ZTEG-F620 pots_0/1-2

ZXAN(config-pon)# onu-type-attr gpon ZTEG-F620 max-tcont 7 max-gemport 32 max-bridge-perslot 1 max-uplink-perbridge 32 ZXAN(config-pon)# exit

ZXAN(config)# show onu-type-attr gpon ZTEG-F620 Onu type

name : ZTEG-F620 Pon type : gpon Description : 4ETH,2POTS Max tcont : 7 Max gemport : 32 Max bridge per slot : 1 Max uplink per bridge : 32 Max